Malaysia delivery or appointment-only Kuala Lumpur pickup available.

20 Nov 2026

FD4089A 600 mm Straightedge: Checking Cylinder Head and Engine Block Flatness

By 亮 张

FD4089A 600 mm Straightedge: Checking Cylinder Head and Engine Block Flatness

During engine repair, inspecting cylinder-head and block surfaces should not rely on eyesight alone. Choose a suitable inspection tool and follow the repair requirements for the vehicle to support subsequent decisions.

The FIDATORQ FD4089A is a 600 mm engine straightedge intended for checking cylinder heads, engine blocks and other flat engine surfaces. This guide covers its listed specifications, uses and buying considerations.

Understanding the FD4089A

The straightedge provides a reference against the surface being checked. Use it with feeler gauges to check the gap between the edge and the surface. It is not an ordinary ruler for reading length markings.

Listed specifications

  • Model: FD4089A
  • Length: 600 mm
  • Width: 36 mm
  • Thickness: 16 mm
  • Accuracy grade: grade 0, as stated in the product information
  • Material: hardened tool steel
  • Package: one straightedge and one plastic storage case

What is it used for?

The straightedge is intended for workshop flatness checks on cylinder heads, blocks and flat engine surfaces, including relevant checks after repair. Before ordering, confirm that its length and specifications suit the area and procedure to be checked.

Checking with feeler gauges

  1. Clean the surface and the straightedge's contact edge.
  2. Place the straightedge in the positions and directions, and under the conditions, specified in the engine repair manual.
  3. Use suitable feeler gauges to check gaps and record the locations and readings.
  4. Compare results with the vehicle manufacturer's repair specifications before deciding what to do next.

Check procedures and permitted distortion vary between engines. Grade 0 is the stated tool accuracy grade; it is not an engine's permitted distortion. This basic overview does not replace the manufacturer's repair manual or professional training.

Storage and care

The hardened tool-steel straightedge comes with a plastic case for storage and transport. Clean and store it carefully after use, avoid impacts, and do not use it as a lever or striking tool.

Before buying

Confirm the required measuring range and accuracy, and prepare suitable feeler gauges. The listed package contains the straightedge and case only; feeler gauges must be supplied separately. If your work requires a specific accuracy tolerance or calibration certificate, confirm availability before ordering.

Explore the FD4089A

Choose a tool whose specifications match the work to be performed. See the product details for this 600 mm straightedge.

View FD4089A product details